Skip to content
English
Contact us
  • There are no suggestions because the search field is empty.

Getting Started | Premium Laboratory Freezers

Intended Use, Safety Guidelines, and Environmental Considerations

Download User Manual

Applicable Models:

TUF-520-30-1-SD
TUF-750-30-2-SD
TUF-950-30-2-SD		  

📜 Quick Navigation

Intended Use

Unpacking

Moving

Operating Environment

Electrical Connections

 

🔍 Need More Information?

📦 Setup & Installation

⚙️ Operating Procedures

🧰 Maintenance & Cleaning

🔧 Troubleshooting & Repair

📜 Warranty & Support

 

 

Intended Use

The Thermoline Premium Laboratory Freezers—520, 750, and 950 models—are designed and manufactured to maintain safe and precise temperature conditions for stored items. Operating within a range of -20°C to -30°C, these freezers feature alarms set 5°C above and below the setpoint, ensuring reliable performance with industry-standard forced draught refrigeration.

Control Accuracy: ±0.5°C

Operating Temperature: from -20°C to -30°C in the freezers.

 

Unpacking

Unpacking process for foam wrapped and crated:

  • Unpacking ProcessIn most cases, the freezer will be foam-wrapped and delivered on its castors via sensitive freight. (Fig 1)
  • For remote deliveries, the freezer may arrive in a crate. To remove the crate packaging (Fig 2):
    • Unscrew both the left and right sides of the packaging.
    • A forklift is required to safely remove the freezer from the crate.
    Do not dispose of the packaging until the freezer has been fully inspected. If any damage is detected upon opening, contact your supplier or Thermoline immediately on +61 2 9604 3911 or email at service@thermoline.com.au.

Crate Unpacking Process

Moving and Lifting

Moving the freezer:

  • Ensure that the freezer is rolled on an even and flat surface. Uneven surfaces can cause the freezer to fall over. 

IMPORTANT

 Freezers are 'Top Heavy'. Do not move the freezer too quickly. (Fig 3 & 4)

        Safe Moving of Incubator  Unsafe Moving of Incubator

 

Operating Environment

Location

  • Place the freezer away from direct sunlight and heat sources (e.g., heaters).
  • Ensure the room's ambient temperature does not exceed the freezer's operational limits.
  • The freezer should be stored inside at all times. Failure to adhere to this could cause significant drops in cabinet performance and damage to items stored inside.
     

 Environmental Conditions

Condition Temperature Humidity
Extreme Operating Environment 10°C to 32°C Up to 85% RH
Optimal Environment 23°C (±2.0°C) 50% RH (±5% RH)

Electrical Connections

This freezer requires a 10amp, 230V, 50Hz power supply. Use a dedicated outlet for the freezer, and avoid using power boards or extension cords. Each freezer is supplied with a standard 3-pin moulded plug for connection to the mains.

Power Supply:

  • The freezer comes with a 2.5m removable mains power lead, featuring a three-pin plug and a female IEC plug.
  • Ensure the freezer is positioned at a reasonable distance from the power supply.

 

Warning Operating Environment Warnings

  • The freezer should be stored indoors at all times. Failure to adhere to this could cause significant drops in cabinet performance and damage to items stored inside.

  • When removing packaging, exercise caution when using knives to cut tape and cardboard to avoid damaging the freezer.