Applicable Models:
📜 Quick Navigation
🔍 Need More Information?
📂 Getting Started
⚙️ Operating Procedures
🧰 Maintenance & Cleaning
🔧 Troubleshooting & Repair
📜 Warranty & Support
Vortex Mixer Location
The vortex mixer requires adequate space on the sides and back for accessibility. Thermoline recommends a minimum clearance of 100mm
Vortex Mixer Attachments
The vortex mixer can be used with several different attachments. The standard TVM-13 top must first be replaced with the TVM-14 universal top plate to allow for use of the other attachments. The TVM-13 standard top slides off the shaft. The TVM-14 universal top plate is then screwed into place.
NOTES:
- Ensure the insert is positioned evenly in the TVM-14 universal top plate before use.
- Only the TVM-13 standard top can be used at speeds over 500 rpm.
The attachments have different speed limitations:
- High speed: 500 rpm to the maximum 3000 rpm
- Low speed: Up to a maximum of 500 rpm
| Accessories | Adjustable Speed Model 400-3000rpm | |||
| Touch Mode | Continuous Mode | |||
| High Speed | Low Speed | High Speed | Low Speed | |
| TVM-13 | Y | Y | Y | Y |
| TVM-31 plus TVM-14 | Y | Y | ||
| TVM-32 plus TVM-14 | Y | Y | ||
| TVM-33 plus TVM-14 | Y | Y | ||
| TVM-34 plus TVM-14 | Y | Y | ||
| TVM-35 plus TVM-14 | Y | Y | ||
| TVM-36 plus TVM-14 | Y | Y | ||
| TVM-38 plus TVM-14 | Y | Y | ||
Various applications with different interchangeable attachments.
